說起玻璃門把手，很多朋友都覺得比其他門把手大。這是因為玻璃門是高度透明的，這樣的設計可以讓把手位置更加顯眼，方便人們使用。如果忽視手柄的選擇和安裝，推拉時很容易損壞手柄。接下來，我們將詳細介紹把手的選購技巧和安裝步驟。

Speaking of glass door handles, many friends think they are bigger than other door handles. This is because the glass door is highly transparent. This design can make the handle position more visible and convenient for people to use. If you ignore the selection and installation of the handle, it is easy to damage the handle when pushing and pulling. Next, we will introduce the selection skills and installation steps of the handle in detail.

玻璃門把手選購技巧：

Purchasing skills of glass door handle:

1、玻璃門把手通常是不銹鋼的，但不銹鋼的種類很多。304不銹鋼質量很好，光澤度高，表面光滑，經久耐用。但201不銹鋼材質較差，表面無光澤，使用一段時間后會變黑，材質較差。選購時要注意區分材質。

1. Glass door handles are usually stainless steel, but there are many kinds of stainless steel. 304 stainless steel has good quality, high gloss, smooth surface and durability. However, 201 stainless steel is poor in material, with a dull surface, which will turn black after being used for a period of time. Pay attention to distinguish materials when purchasing.

2、玻璃門把手的尺寸比較大，但是選購時要根據門體的尺寸來選擇，而不是說尺寸越大越好。把手的規格也應符合玻璃門把手的孔距，否則無法安裝。

2. The size of the glass door handle is relatively large, but it should be selected according to the size of the door body, not that the larger the size, the better. The specification of the handle shall also comply with the hole spacing of the glass door handle, otherwise it cannot be installed.

3、如果不知道如何判斷材質和質量，可以購買質量好的產品。這種方法簡單快捷，為選擇困難的朋友省時省力。

3. If you don't know how to judge the material and quality, you can buy high-quality products. This method is simple and fast, saving time and effort for choosing difficult friends.

濟南玻璃門把手安裝步驟：

Installation steps of Jinan glass door handle:

1、選擇有把手孔距的玻璃門把手，檢查各部件是否能與孔口緊密連接。如果太緊，請用鉆機小心展開。如果太松，請用膠帶將零件包裹起來。

1. Select the glass door handle with handle hole spacing, and check whether each component can be closely connected with the hole. If it is too tight, use a drill to carefully unfold it. If it is too loose, wrap the part with adhesive tape.

2、先拆開玻璃門把手，再在把手孔處組裝。在插入孔的地方涂上一些玻璃膠。把手和玻璃門的根部用螺絲固定，保證不會松動。

2. First disassemble the glass door handle, and then assemble it at the handle hole. Apply some glass adhesive to the insertion hole. The handle and the root of the glass door are fixed with screws to ensure that they are not loose.

3、玻璃門與把手連接后，安裝玻璃門把手的其他部分，然后調整水平位置。門兩側的把手應對齊，兩扇門上的把手也應對齊。檢查各部件安裝穩固后，即可正常使用。

3. After the glass door is connected with the handle, install other parts of the glass door handle, and then adjust the horizontal position. The handles on both sides of the door shall be aligned, and the handles on both doors shall also be aligned. After checking that all components are installed stably, they can be used normally.

安裝手柄時，仔細檢查零件是否能與孔緊密連接。如果太緊，應該用鉆頭小心地展開。如果太松，請用膠帶將零件包裹起來。

When installing the handle, carefully check whether the parts can be closely connected with the hole. If it is too tight, it should be spread out carefully with a drill bit. If it is too loose, wrap the part with adhesive tape.

濟南玻璃門是由許多五金配件和玻璃組成的。安裝本產品時，不僅要注意門的玻璃，更要注意把手。以上就是內容。您可以關注我們的網站www.traneyx.com.cn了解更多詳細信息。

Jinan glass door is composed of many hardware fittings and glass. When installing this product, pay attention not only to the glass of the door, but also to the handle. The above is the content. You can follow our website www.jnkdblgd Com for more details.